A750E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY (2008 Sequoia)

Last Modified: 11-29-2007		1.6 A
Service Category: Drivetrain	Section: Automatic Transmission/Transaxle
Model Year: 2008	Model: Sequoia	Doc ID: RM000002YBH00KX
Title: A750E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY (2008 Sequoia)

REASSEMBLY

1. INSTALL SHIFT LOCK CONTROL ECU

(a) Engage the 3 claws, and install the shift lock control ECU.

(b) Connect the shift lock solenoid connector.

2. INSTALL LOWER POSITION INDICATOR HOUSING

(a) Engage the 6 claws, and install the lower position indicator housing.

3. INSTALL SHIFT LOCK RELEASE BUTTON

(a) Engage the 2 claws, and install the shift lock release spring and shift lock release button.

4. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

(a) Install the No. 2 position indicator slide cover to the position indicator slide cover.

5. INSTALL POSITION INDICATOR SLIDE COVER

(a) Install the position indicator slide cover with the No. 2 position indicator slide cover.

HINT:

Install the position indicator slide cover so that its mark faces the vehicle front.

6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY

(a) Engage the 4 claws, and install the position indicator housing.

7. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

(a) Align the wire with the key part of the position indicator housing lower, and install the wire. Then rotate the wire clockwise until it locks.

(b) Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.